45° Aluminum Elbow Insert w/ Hardware

Want to ensure smooth functionality of the Aluminum Dump Tarp System? Here’s a 45-degree Elbow for Aluminum Dump Truck Tarp Systems. It’s an essential component that connects the arms, ensuring smooth movement and reducing the likelihood of an accidental collision. Add this bend and efficiently redirect the tarp arms away from front-end loaders and excavators. They are easy to install - you can do it yourself or connect with an expert. Explore the detailed understanding of the product below:-

• Dimension Details: It’s a curved 45-degree bend elbow that acts as a connector to complete the tarp system’s tubing or framework. The width and height of the elbow are 2" and 1-3/16", respectively. Meanwhile, the bolt hole diameter is 7/16".
• Durable Construction: This tarp system corner is engineered from durable aluminum, which will seamlessly fit into the aluminum dump truck tarp systems. It’s lightweight, corrosion-resistant, and ensures minimal wear over time, making it perfect for outdoor environments.
• Functionality: The key function of this elbow is to create a 45-degree angle in the tarp’s system tubing or framework. It will ensure proper alignment, and redirection of tarp arms and components, preventing it from collision. It will ensure smooth operation and a seamless path without kinking or misalignment. If you need a different-angle elbow, kindly check out here.
• Installation: The joint has pre-drilled holes. Thus, involving a few straightforward steps, follow it below:-
  1. Measure the section where the elbow needs to be installed for proper alignment.
  2. Select and mark the positions for tubing connections, mark the bolt holes, and do what is needed.
  3. Cut the tubes if needed for smooth installation.
  4. Slide the elbow inside the tube and fasten it with bolts and nuts.
  5. Move the tarp system to check the operation. If there’s any wobbling or looseness in the connections. Tighten as needed.