NOTE: Assembly #6, often referred to as the steel pull bar assembly, is an optional add-on. This listing does not include the pull bar, end caps, or j-hook style retaining brackets for your dump trailer.
Our CRANK AND PULL tarping system is a manual cab level crank kit that is perfect for landscape trailers, dump trailers, and medium to light duty truck bodies. This kit is the answer to our partners looking for the most affordable, easiest to operate, nothing in the way tarp system.
- Mounts on the front of any length box
- Fits box widths up to 8' 6"; 103" aluminum extruded standard tarp axle is 1-1/2" in diameter and can be cut to whatever width you need
- Can be used with tarps up to 40' long
- NOTE: Tarps ordered for use with this system should measure at least 4" less than the width of your mounted axle
- Spring-loaded, break-away crank handle
- Steel powder-coated mounting brackets and sealed bearings.
This Kit Includes:
- (1) Cab Level Tarp Axle
- (1) 1" Axle Bearing with Flange 3/4" Hole
- (1) Driver Side Cab Level Bracket and Passenger Side Cab Level Bracket
- (1) 3/8" Derby Rope
- (1) Cab Level Crank Handle
- (1) Steel Sprocket
- (2) 15" Bungee Strap with J Hook
- (4) 3 1/2" J Hooks (Dia: 11.8mm)
Hardware
- (7) 1/4" x 1" Hex Head Bolt
- (5) .8ID x T.2mm Washer
- (4) 3/8"-16 x 1" Hex Head Bolts, 3/8" Nylon Nuts, and 3/8" Lock Washers
- (1) 1/4"-20 x 2" Hex Head Bolt (Half Thread)
- (1) 1/4" Nut
- (8) 1/4" x 1" Philips Head Self-Tapping Screw
Installing Pull Rope
- Attach the free end of the Pull Rope to the center of the Rear Pull Bar, through the grommet, with the cut end facing upwards. Cut the rope to the desired length, and tie a knot.
- Mount two J-hooks, with the supplied self-tapping bolts, opposing each other near the rear of the dump (typically on the gate) to secure the Pull Rope in the covered position.
- Mount two J-hooks with the supplied self-tapping bolts opposing each other near the front of the dump to secure the Pull Rope in the uncovered position.
Customer Reviews
The instructions were a little too detailed for me... I'm more of a visual and hands on type of guy. It took me about 2-3 hours to install. The tarp feels very thick and durable. It was a perfect fit for my 14' dump trailer. I didn't measure if the tarp was 18'. I think it's worth it for the money. It'll definitely get the job done.
Everything was just right! Great product! Thank you very much...
I bought a7x14 trailer.. this is perfect fit.. easy install if your handy and good quality fabric.. i'm happy with it for the price.. would've given 5 stars but the inner shaft is starting to rust already.. and it's only 2 months old .
Finally got this installed and was able to use it right away. Works great, no more remembering to take the tarp out of the bed before throwing debris in. Easy to unwind and lock in place. Would recommend. Installation did require some drilling, but easy with the right tools. I wouldn't say I'm an expert installer but limited mechanical skills would be needed.
They send me the 7 by 14 when I ordered 7x18 other than that it works well, tarp seems and feel strong