Apache Slim 12 volt electric tarp system replacement motor with chrome cover that does NOT require bracket. This design bolts directly to motor with three bolts, no more bracket hassle here. 50:1 ratio and 5 bolt universal mounting plate. Will work with three, four or five bolt set up including Buyers, Aero, Donovan and US Tarp. 3yr warranty. FASTEST cover and uncover time to get the drivers back on the road.
Our Fastest Tarp Motor!
This replacement tarp motor will have your tarp system back up and running in no time, due to the wide compatibility and universal bolt pattern. The 1.5 HP motor and 50:1 gear ratio make it one of the strongest, fastest motors, ideally suited for most dump beds up to 28 ft.
Type: Direct Drive*
Gear reduction: Worm to Wheel
Gear ratio: 50:1
Mounting: Three 5/16 - 18 Grade 5 minimum bolts
Output Shaft: 3/4" using 5/16" through hole
Operating torque: 44 NM
Current Draw @ rated torque: 40 Amps
Power: 1.5 hp
Dimensions: L:12", W:6.5", H:4"
Replaces Apache Slim and most other slim motors for bodies under 28'
Reversible action motor includes chrome housing and 3 year warranty.
Slim Motors have three 5/16"-18 x 1/2" deep mounting holes on the output shaft side of the gearbox. All three mounting holes should be used when mounting the direct drive motor unit to the bulkhead (drilling new holes or welding the gearbox or other parts of the unit will void the motor's warranty).
Opening, separating, or otherwise tampering with motor and gearbox will void warranty.
The gearbox has a 3/4" diameter output shaft with a 5/16" diameter through hole. To minimize stress on your motor and gearbox, avoid the use of oscillating loads and attach tubes as straight as possible to the output shaft.
Complete a thorough check and installation of all wiring while all cables are unattached. Where necessary, securely fasten all wiring to adjacent structure using cable ties.
Recommended gauge of wire: 6
*Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool.